Single Sphere High Temperature

Flanged

High Temperature Single Sphere Rubber Bellows

This range of expansion joints is comprised of an EPDM single sphere moulded bellows, with high tensile synthetic reinforcement and steel wire reinforced faces. With carbon steel galvanised flanges which are free to rotate around the bellows axis, this feature facilitates installation and the construction ensures that all inner surfaces that contact the flow media, are EPDM rubber. These rubber bellows are used to absorb vibration and attenuate noise caused by reciprocation plant such as pumps, chillers and air handling units.

Not suitable for drinking water, cooling water with oil containing additives, oily compressed air or permanent effect of steam.

Data Sheet

KRB/16/121

Tied

High Temperature Single Sphere Rubber Bellows

This range of expansion joints is comprised of an EPDM single sphere moulded bellows, with high tensile synthetic reinforcement and steel wire reinforced faces. With carbon steel galvanised flanges which are free to rotate around the bellows axis, this feature facilitates installation and the construction ensures that all inner surfaces that contact the flow media, are EPDM rubber. These expansions joints are also fitted with adjustable tie bar assembly which are seated on noise absorbing rubber top hat washers. These rubber bellows are used to absorb vibration and attenuate noise caused by reciprocation plant such as pumps, chillers and air handling units.

Not suitable for drinking water, cooling water with oil containing additives, oily compressed air or permanent effect of steam.

Data Sheet

KRB/16/122